Troubleshooting Guide: Fixing LE Code on LG Front Load Washer – Unlocking and Draining Tips

If you own an LG front load washer, you may have encountered the dreaded LE error code. This code indicates a problem with the motor, often caused by an overloaded wash drum or a jammed drain pump. The good news is that you can often fix this issue yourself without needing to call in a professional. In this guide, we’ll walk you through the steps to troubleshoot and fix the LE code on your LG front load washer, including tips on unlocking the engine and draining the water.

Understanding the LE Error Code

The LE error code on an LG washer indicates a problem with the motor. This could be due to an overloaded drum, a jammed drain pump, or a malfunctioning Hall Sensor, which monitors the motor’s speed. Before you start troubleshooting, it’s important to understand what might be causing the issue.

Unlocking the Washer

If your washer is locked and won’t open, you’ll need to unlock it before you can start troubleshooting. Here’s how:

• Unplug the washer from the power source.
• Wait for about a minute.
• Plug the washer back in.
• Press and hold the “Start/Pause” button for about five seconds.

This should unlock the washer. If it doesn’t, you may need to contact a professional for help.

Draining the Water

If there’s water in your washer that won’t drain, you’ll need to manually drain it. Here’s how:

• Unplug the washer from the power source.
• Locate the drain pump filter on the bottom front of the washer.
• Place a shallow pan or towel under the filter to catch any water.
• Slowly turn the filter counterclockwise until it comes out.
• Let the water drain out.
• Once the water is drained, clean the filter and put it back in.

Checking the Load Size

If your washer is overloaded, it can cause the motor to overwork and trigger the LE error code. Make sure you’re not overloading your washer and that the load is evenly distributed.

Checking the Drain Pump

If the drain pump is jammed, it can also cause the LE error code. Check the drain pump for any obstructions and remove them if necessary.

Replacing the Hall Sensor

If none of the above steps work, the problem might be with the Hall Sensor. This is a more complex repair that involves disassembling the washer, and it might be best to call a professional for this.

By following these steps, you should be able to troubleshoot and fix the LE error code on your LG front load washer. Remember, if you’re not comfortable performing these steps yourself, it’s always best to call a professional.